Lakshmi Electro Controls & Automation
Peenya, Bengaluru, Karnataka
Send E-mail
Send SMS
Home»Our Product Range»

Adhesive And Sealants Weicon

Prominent & Leading Manufacturer from Bengaluru, we offer adhesives & sealants weicon, industrial sealants, lock pen system, mixing sealants weicon, structural adhesive and weicon easy mix s 50 sealant.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Product Details:
Surface of ApplicationPlastic, Ceramic, Wood, Glass
Grade StandardIndustrial Grade, Food Grade, Agriculture Grade, Chemical Grade, Pharmaceutical Grade
Packaging Size50 ml to 2 kg
FeaturesImpact Resistant, Moisture Resistant, Vibration Resistant, Heat Resistant, Water Resistant
BrandWEICON

ADHESIVES AND SEALANTS the fast, strong and universally usable power adhesive. Replaces traditional fixings like screws, pegs, rivets, etc. Speed-Flex® is pasty and stable and, thus, suitable for problem-free bonding even on vertical surfaces both in-house and outside.

Many materials, like metals, plastics (except PE, PP, PTFE), concrete, marble, natural and artificial stone, ceramic, enamel, gypsum, plates of MDF, wood, flake or gypsum plaster boards can be bonded permanently to themselves and among each other.

Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Product Details:
Surface of ApplicationPlastic, Ceramic, Wood, Glass
Grade StandardIndustrial Grade, Food Grade, Agriculture Grade, Pharmaceutical Grade
Packaging Size50ml to 2 kg
FeaturesImpact Resistant, Moisture Resistant, Vibration Resistant, Heat Resistant, Water Resistant
BrandWEICON
Elastic adhesives and sealants are used in many areas of industrial production. They combine the advantages of adhesive bonding and sealing technology and are used wherever the elasticity and sealing of a joint are the most important.
Weicon adhesive and sealant are classified in three product groups with a differing chemical basis:
MS-polymers
Polyurethanes
Silicones
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Product Details:
Brandweicon
WEICONLOCK is ready for use and should be applied evenly direct from the bottle/tube with the dispensing tip (avoid direct contact of dispensing tip with metal). On press fitted parts and larger cylindrical assemblies a thin and uniform layer should be applied on both surfaces. In the case of threaded blind holes fill sufficient quantity in the bore hole. On screws and bolts, apply WEICONLOCK around the thread. Do not pour back into the bottle any WEICONLOCK fluid which had contact with metal; even smallest metal particles will cause the content of the bottle to cure. In series construction, the use of manual or automatic applicators is recommended.
Additional Information:
  • Item Code: AN302-70
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Product Details:
Surface of ApplicationPlastic, Ceramic, Wood, Glass
Grade StandardIndustrial Grade, Food Grade, Agriculture Grade, Chemical Grade, Pharmaceutical Grade
Packaging Size50 G TO 2 KG
FeaturesImpact Resistant, Moisture Resistant, Vibration Resistant, Heat Resistant, Water Resistant
BrandWEICON
The fast, strong and universally usable power adhesive. Replaces traditional fixings like screws, pegs, rivets, etc. Speed-Flex® is pasty and stable and, thus, suitable for problem-free bonding even on vertical surfaces both in-house and outside.

Many materials, like metals, plastics (except PE, PP, PTFE), concrete, marble, natural and artificial stone, ceramic, enamel, gypsum, plates of MDF, wood, flake or gypsum plaster boards can be bonded permanently to themselves and among each other.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Product Details:
Surface of ApplicationCeramic, Wood, Glass
Packaging Size50G TO 2 KG
Grade StandardIndustrial Grade, Food Grade, Agriculture Grade, Pharmaceutical Grade
FeaturesImpact Resistant
Pack Size (kilogram)50ml to 2 kg
Material CompatibilityCeramic, Concrete, Composites, Metal
FormGel, Liquid
Temperature Range-40 to 380
BrandWEICON
ColorTransparent
WEICON Easy-Mix RK-7200 is a high strength, solvent-free and fast-curing structural adhesive. It is based on MMA (methyl methacrylate) and has an excellent adhesion on many materials. Because of the transparent curing, RK-7200 is particularly suitable for transparent joints where the bonding seam should not be visible. This adhesive can also be used for structural bondings where a coloured adhesive would not fi t optically to the construction parts. Thus, transparent plastics like e. g. acrylic glasss (PMMA) and other materials can be bonded in a clean and appealing way. Product Code:WEICON Structural Adhessive RK 700 Brand Name: WEICON
Additional Information:
  • Item Code: RK700
Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 3,100  / 50ML Get Latest Price

Product Details:
Minimum Order Quantity12 50ML
Packaging Size50 G TO 2KG
Usage/ApplicationPlastic, Ceramic, Wood, Glass
BrandWEICON
Grade StandardIndustrial Grade
FeaturesImpact Resistant
Processing WEICON Easy-Mix products can be processed directly from the double cartridges with the help of the included static mixer. Reject the first 5 cm of the dosed bead. Apply adhesive to only one of the surfaces to be bonded. The pot life given is for a material quantity of 10 ml at room temperature. If larger quantities are used, the curing time will be faster. Similarly, higher ambient temperatures shorten the cure times (as a rule of thumb, every +10°C increase above room temperature will halve working and curing time). Temperatures below +16°C will extend working and curing times considerably, while below about +5°C, no reaction will take place at all. Storage When kept at a constant room temperature of about +20°C and unopened in dry conditions, WEICON Epoxy Adhesives will keep for at least 18 months. Avoid direct sunlight. If these storage instructions are disregarded, the storage life will be reduced to six months. Epoxy resins are fundamentally liable to crystallise at temperatures of less than +5°C. This effect is accentuated by wide variations in temperature such as can frequently occur during transport in winter. This also has a negative effect on working qualities, curing and technical details, although these effects can be reversed by warming up to a maximum of +50°C (no naked flame). In the case of WEICON Epoxy Adhesives, careful selection and combination of the base resins (bisphenol A and F) ensures a reduction of crystallisation. Note Any product specifications and recommendations given herein must not be seen as guaranteed product characteristics. They are based on our laboratory tests and on practical experience. Since individual application conditions are beyond our knowledge, control and responsibility, this information is provided without any obligation. We do warrant the continuously high quality of our products being free from defects in accordance with and subject to our General Sales Conditions. However, own adequate laboratory and practical tests to find out if the product in question meets the requested properties are recommended. A claim cannot be derived from them. The user bears the only responsibility for non-appropriate or other than specified applications. Health and Safety When using WEICON products, the physical, safety technical, toxicological and ecological data and regulations in our EC safety data sheets (www.weicon.com) must be observed.
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 12,000  / TWO KG Get Latest Price

Product Details:
Minimum Order Quantity1 TWO KG
Grade StandardIndustrial Grade, cement and machine tool
Packaging Size2kg
FeaturesImpact Resistant, Moisture Resistant, Vibration Resistant, Water Resistant
BrandWEICON
Weicon Plastic Metal F2

liquid, aluminum-filled, temperature resistant from -35°C up to +120°C

Non-corroding, low specific weight.

WEICON F2 is highly recommended for making castings, and in particular for

  • making moulds, forms and templates
  • reconditioning porous or damaged castings
  • making prototypes and holding devices
  • pouring out swages to test their exactness

FOB Price: 14000 - INR

MOQ: 1 - 2 Kilogram


Additional Information:
  • Delivery Time: 2-4 weeks
Yes! I am Interested
View PDF
REQUEST CALLBACK
Get Best Quote

Approx. Rs 2,600  / Piece Get Latest Price

Product Details:
Surface of ApplicationPlastic, Paper, Ceramic, Wood, Glass
Grade StandardIndustrial Grade, Food Grade, Pharmaceutical Grade
Packaging Size12
FeaturesImpact Resistant, Moisture Resistant, Vibration Resistant, Heat Resistant, Water Resistant
BrandWEICON LECA
WEICON Easy-Mix N 50

deal for manufacturing processes with assembly and positioning carried out at different times.

  • viscid, self-levelling
  • normal pot life (45 minutes)
  • longer curing time
  • colour yellow, opaque
  • Technical data Basis epoxy resin, unfilled Natureviscid Supplied indouble cartridge Content50 ml Mixing ratio by volume (Resin/Hardener)1 : 1 Pot life with 10 ml material at +20°C45 Min.Density of the mixture1,07 g/cm³Viscosity of the mixture at +20°C7.500 mPa·s Processing temperature+10 bis +40 °Curing temperature+10 bis +40 °C Colours lightly yellowish, clear Gap covering power to max.2 mm Handling strength (35% strength/+20°C) after120 Min.Capable of bearing mechanical loads(50% strength/+20°C) after24 hFinal strength (100% strength/+20°C) after3 day(s)Pressure2 MPaTensile35 MPaTorsion50 MPaShore hardness D55 Steel, sand-blasted17 N/mm²Aluminium, sand-blasted16 N/mm²Rigid PVC, roughened11 N/mm²Temperature resistance-50 bis +80 °C
  • Easy-Mix N 50Technical Datasheet Create Date: 06.06.2016 - Page 1/1high adhesive force viscous, self-levelling WEICON Easy-Mix N 50 can be used on numerous materials such as metal, plastic, fibre reinforced materials, ceramics, glass, stone and wood.WEICON Easy-Mix N 50 is suited for manu-facturing processes with assembly and positioning carried out at different times.
Yes! I am Interested
X
 

Download Brochure
Explore more products
Lakshmi Electro Controls & Automation

A. N. Girish(Proprietor)
No. 136-137/6, 8th Main, 3rd Phase Peenya Industrial Area
Bengaluru - 560058
Karnataka, India
Send Email
© Lakshmi Electro Controls & Automation. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited