Lakshmi Electro Controls & Automation

reliable protection against corrosion,seizing and cold welding
WEICON Anti-Seize Assembly Spray is high temperature resistant and has excellent separating characteristics. WEICON Anti-Seize is used as a protecting, separating and lubricating agent for highly stressed parts. Ideally compatible solid contents and selected additives enable a wide range of usage. WEICON Anti-Seize protects against corrosion, seizure and wear, stick-slip phenomena, oxidation, fretting corrosion and electrolytic reactions („cold welding“). The product can be used in many industrial applications. 

WEICON Zinc Spray is approved by the German TÜV and provides a long-lasting cathodic corrosion protection to all metal surfaces. The spray forms a fast-drying, adherent protective layer of microfine zinc flakes.

In the salt spray test according to DIN EN ISO 9227, metal parts coated with WEICON Zinc Spray did not show any signs of corrosion after more than 1050 hours. The zinc flakes form a resistant protective layer, even under extreme weather and environmental conditions.

Zinc Spray thus fulfils higher requirements than those defined by the DIN EN ISO 1461 standard. WEICON Zinc Spray can be used as a high-grade anti-rust primer, for the coating of welded joints and drilled holes, as a conductive intermediate layer for spot welding and wherever metal must be protected against corrosion

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cans

Zinc-Alu Spray lastingly protects all metal surfaces against rust and corrosion. WEICON Zinc-Alu Spray forms a fast drying and adherent protective layer and is resistant to many chemicals.

Zinc-Alu Spray is dust-dry after approx. 15 minutes and can be smoothed and painted over without pre-treatment after around 12 hours.

WEICON PTFE-Spray is a grease-free PTFE-based dry lubricant with excellent sliding properties. WEICON PTFE Spray adheres to all metal, plastic and wood surfaces. Its high PTFE content greatly reduces the friction coeffi cient. The coating repels dirt, dust and water and is resistant to oils, greases and many chemicals.

PTFE Spray can be used on runners and guides, conveyor belts, transport rollers, slides, windows, cutting tools and packing machines. It can also be used as a permanent lubricant for shafts in plastic bearings, as a water-rejecting coating for paper seals, cork seals and seal packaging, as a substitute for release agents containing silicone, and wherever oil or grease lubrication is not permitted or desired. The product can be used in many industrial applications.

Additional Information:

• Delivery Time: 10-12 days

PTFE-Fluid is a special dry lubricant with strong anti-adhesive effect, and has an NSF registration for the foodstuffs sector. This means that it can be used in the foods and beverages industry and in the pharmaceuticals and cosmetics industries.

Due to the high proportion of PTFE, the spray provides an anti-adhesive effect, through which the friction value on the coated surfaces is substantially reduced. PTFE Fluid is grease-free and adheres to all metal, plastic and wooden surfaces. The coating repels dirt, dust and water and is resistant against oils, greases and many chemicals. Due to its special formula and the resulting NSF registration, WEICON PTFE Fluid can contribute towards the improvement of workplace safety and health protection.

The spray can be used as permanent lubrication in many sensitive industrial areas such as on sliding and running rails and guides, on conveyor belts, transport rollers and slides, on tilt mechanisms, locks and hinges, on cutting tools and packaging machines, for shafts in plastic bearings and as a coating for solid seals and assembly aids for seal packs.

Additional Information:

• Delivery Time: 10-12 days

WEICON Rust Looseners six-fold function makes it indispensible for repairs, maintenance and servicing. Thanks to its excellent creeping capacity, WEICON Rust Loosener reaches even the smallest cavities.

WEICON Rust Loosener loosens rusted and stiff parts, screws, bolts, joints and hinges, permanently protects against corrosion and oxidation, durably lubricates sliding surfaces, cleans and cares for metallic surfaces and mechanical parts and is temperature resistant from -20°C to +150°C (-4 to +302°F).

Additional Information:

• Item Code: 10000340
• Production Capacity: 4
• Delivery Time: 4- 6 WEEKS ON ORDER
• Packaging Details: BOX Packaging

• Non flammable, anticorrosive,
• DIN-DVGW-tested,
• foam-forming leak detector according to DIN EN 14291

• Leak Detection Spray is non-flammable, anti-corrosive and DIN-DVGW-tested (certificate 5170AO0666). The spray is used for the fast, convenient and reliable location of leaks (cracks or porous spots) in pressurized pipes.

  WEICON Leak Detection Spray does not form any hazardous compounds with carbon dioxide (CO2), propane, butane, acetylene, oxygen, city or natural gases.

  Leak Detection Spray can be used wherever compressed air, natural or liquid gas is processed, and wherever leaky points can occur on fittings, threated joints, and connections. It greatly contributes to the safety of pneumatic brakes and gas lines.

Additional Information:

• Item Code: 11651400
• Production Capacity: 100
• Delivery Time: 1 day
• Packaging Details: BOX

WEICON Anti-Spatter Spray contains no silicone and is used to clean welding nozzles and to keep them clean. At the same time, it protects the work piece to be welded against the effect of weld splashes without impairing the welding seam.

Anti-Spatter Spray prevents the adhesion of welding splashes on gas nozzles and workpiece surfaces, offers gap-free protection for the welding process, and makes follow-up cleaning of the work-pieces with a spatula, brush or chisel superfluous.

Post-treatment of the work-piece such as: bronzing, galvanisation, anodising or painting is possible without special cleaning. Cleaning, for example, with WEICON Spray Cleaner S, may be necessary solely in the case of excessive spraying

Additional Information:

• Item Code: 11700400
• Delivery Time: 1 Month
• Packaging Details: box

WEICON Stainless Steel Spray

WEICON Stainless Steel Spray is a corrosion and weather resistant surface coating. Due to the high chemical resistance, it can be used wherever a resistant, effective protective layer is required.
The alloy is composed of chromium, nickel, and manganese.

Applications:

• For the repair of damaged stainless steel parts
• On lorry attachments
• On silos and pipelines
• Outdoors (weather-resistant)
• For the optical refinement of glass, wood, stone, ceramics, and most plastics
• For decorative purposes

WEICON Stainless Steel Spray is dust-dry after 10 minutes and attains full adhesion and abrasion strength after 4-6 hours. It is temporarily temperature-resistant up to

+300°C (+572°F)

 

WEICON Aluminium Spray A-100 / A-400

WEICON Aluminium Sprays contain aluminium pigments with a purity grade of <> 99.5% and offer high-quality corrosion protection for all metallic surfaces.

Typ A-100: abrasion-resistant
Typ A-400: very high brilliance

Applications:

• In refridgeration and ventilation technology
• In combustion plants
• In pipelines and machine housings
• In exhaust systems (only A-100 and only on end pipes)
• On fibre-glass car body parts
• In model construction, applied art, and toy manufacturing

WEICON Aluminium Sprays are resistant against many diluted acids and lye, as well as atmospheric influences. The temperature resistance of the coating amounts to +800°C (+1,472°F).

WEICON Zinc Spray / Zinc Spray "bright grade"

WEICON Zinc Sprays offer quick-drying corrosion protection with a long-term effect for all metals.

WEICON Zinc Spray provides all metal surfaces, such as hot-dip galvanised parts being repaired, with permanent, cathodic corrosive protation. It forms a quick-drying, adhesive, protective layer of microfine zinc flakes.

In a salt spraying test according to DIN 53167 or DIN 50021, metal parts sprayed with WEICON Zinc Spray showed no corrosion, even after more than 550 hours. The innovative zinc flakes form a highly resistant protective layer, even against extreme weather and environmental influences.
In this way, WEICON Zinc Spray fulfils higher requirements than demanded in DIN EN ISO 1461.

The colour of WEICON Zinc Spray "bright grade" has been adapted to that of hot-dip galvanisation.

Applications:

• As high-quality rust protection primer
• For touching up welded or drilled sections
• As a conductive intermediate layer in spot welding
• Wherever metal must be protected from corrosion

In addition to the above-mentioned applications, WEICON Zinc Spray "bright grade" is preferred for the repair of damaged zinc coatings in the same colour.

WEICON Zinc Sprays are dust-dry after about 15 minutes and can be spackled and painted over after about 12 hours without pretreatment.

The temperature resistance amounts to up to +500°C / +932°F ("spezial hell" up to +300°C / +572°F).

 

weicon citrus cleaner is a universal cleaner based on alcohol and citrus peel extracts.

weicon citrus cleaner makes use of the disinfecting effect of its high isopropyl content, and thus supports the overall cleaning and disinfection of surfaces. The all-purpose cleaning agent can be used in various industries and trades, in window construction, in public institutions and means of transport, in construction companies as well as around the house. It cleans a wide range of materials, such as metals and plastics, glass, ceramics and painted or coated surfaces. Weicon citrus cleaner also provides excellent results and high efficiency in basic hygiene and in the support of additional hygiene practices, in the cleaning of frequently used hand tools as well as in removing staining due to pencils, ballpoint pens and felt-tip pens.

*for safety reasons, the material compatibility should be checked beforehand in a concealed area.

Additional Information:

• Delivery Time: 4

WEICON Silicone-Fluid is a special, physiologically harmless sliding agent and lubricant for sensitive areas. It has an NSF H1 approval for the food industry, and can therefore be used in the foods and beverages industry and in the pharmaceuticals and cosmetics industries.

Silicone-Fluid can also be used as release-, protective- and care agent on the most different surfaces like plastics, metal, stainless steel and rubber.

Silicone-Fluid has a durable and good surface quality and is temperature-resistant up to +250°C (+482°F). Due to its special formula and the resulting NSF H1 approval, WEICON Silicone-Fluid is used to improve workplace safety and health protection.

Additional Information:

• Delivery Time: 4-6days

Aluminium Spray A-400 has the highest brilliancy and is resistant to many diluted acids and lyes, as well as to wheater effects. It contains aluminium pigments with a purity grade of <>99.5%. WEICON Aluminium Spray A-400 offers high-grade corrosion protection for all metal surfaces. Aluminium Spray A-400 can be used in cooling and ventilation technology, combustion systems, pipelines and machine housings, fibre glass car body components, in model building, arts and crafts, toy manufacturing and in many additional applications.

Additional Information:

• Delivery Time: 4-6 days

WEICON Rust Remover and Contact Spray is indispensable for repair, maintenance and servicing due to its 6-fold effect. Thanks to their very good creeping properties, rust remover and contact spray penetrate even the smallest spaces. With the 3-way spray valve, work is possible in any position (even overhead).

WEICON Rust Loosener and Contact Spray loosens rusted and stiff components, screw connections, bolts, joints and hinges, displaces water from ignition systems, secures the function of mechanical parts and contacts, e.g. on distributor caps and spark plug connectors, provides lasting protection against corrosion and oxidation, lubricates sliding surfaces for a long time and cares and cleans metal surfaces, mechanical parts and electrical systems.

Additional Information:

• Delivery Time: 4 weeks
• Packaging Details: box

WEICON Welding Protection Spray is silicone-free and is used to clean and keep the welding nozzles clean. At the same time, it protects the workpiece to be welded from the effects of spatter without affecting the weld seam.

Welding protection spray prevents welding spatter from sticking to gas nozzles and workpiece surfaces, offers complete protection during the welding process and makes subsequent cleaning of the workpieces with spatulas, brushes or chisels superfluous.

Post-treatment of the workpieces such as: browning, galvanizing, anodizing or painting is possible without special cleaning. Cleaning, e.g. with WEICON Spray Cleaner S, may only be necessary if the spray is too strong.

Additional Information:

• Item Code: 38109090
• Production Capacity: 100
• Delivery Time: 5-6 Weeks (Imported from Germany)
• Packaging Details: DG Carton box

WEICON Surface Cleaner is used for the cleaning and degreasing of surfaces to be joined or sealed with WEICON adhesives and sealants.

WEICON Surface Cleaner can be applied on materials like metal, glass, ceramics and most plastics and evaporates without residues.

Surface Cleaner can also be used to clean and degrease machine components in the course of maintenance work.

Additional Information:

• Delivery Time: 3-6days

The test spray is ideal to quickly and reliably test the functionality of optical or photoelectric smoke detectors. The use of the low-flammability test aerosol does not soil the smoke detectors, as the spray evaporates completely without leaving any residue. WEICON Smoke Detector Test Spray non-flammable is very easy to apply and can be used wherever photoelectric smoke detectors are installed – for example in the shipping industry, in industrial plants, public institutions or private households.

Get best price for WEICON Optical Smoke Detector Test Spray non-flammable

WEICON Anti-Seize consists of selected, fi nely ground, metallic solid lubricants and a high-quality synthetic oil mixture. This combination has been proven worldwide for many decades in a number of applications with materials made of steel, iron, or cast iron in all industrial areas.

Additional Information:

• Delivery Time: 2 weeks

WEICON Freeze-Spray has many uses and is suitable for fault-finding in electronics and for repair works in industrial sector.

Freeze Spray quickly cools parts down to -45°C and allows pinpointed chilling of even the smallest construction parts.

WEICON Freeze Spray is non-conductive and neutral to materials (with the exception of plastic) and can be used in many industrial and technical applications.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 1 week